Everloc products are suitable for use on non-porous surfaces such as glass, tiles, laminates and mirrors and it’s easy installation has eliminated the need for drilling, tools and tedious product assembly.
For use on porous surfaces such as wood and plasterboard/gyproc, we recommend using Everloc Adhesive Disks. These plastic disks adhere directly to the mounting surface providing a stable, airtight platform to install your Everloc suction cups.
Firstly, place the suction cup in the desired location, ensuring the pilot hole is at 12 o’clock. Once you are happy with the position press firmly on the white thread to activate the silicon ring.
Place the hook onto the suction cup with the guide knob slotting into the pilot hole. Place the cap over the hook and turn clockwise 6-7 times (do not overtighten).
Always check the suction cup is secure before loading the Everloc product. Everloc products can hold up to 15kgs*.
Once installed your Everloc product can be removed with ease without surface damage and can be reinstalled time and time again.
When the time comes to clean your Everloc accessory, simply use warm water and a soft cloth to wipe down the chrome surface.
To prepare your Everloc product for re-installation soak suction cups in hot water for 15 minutes to allow suction cups to reset.
For more info on how to install your product and other great tips please refer to the downloadable instructions below or view the instructional video located at the top of this webpage.